TL;DR · 30-second read

The Short Version

Shanghai Electric, a large Chinese engineering company, has won its first order outside China for the giant gas-burning engines that drive power station generators. They will go into a new power plant in Malaysia.

Why it matters: the few American, European and Japanese firms that dominate this business have waiting lists stretching years, partly because artificial intelligence needs so much electricity. A new supplier promising machines from 2028 could give power-hungry countries another option, if its equipment proves itself abroad.

Shanghai Electric (SEHK: 02727, SSE: 601727) announced in a press release on September 14, 2026 that it has won the contract for Unit 3 of the Sarawak Samalaju Combined Cycle Gas Turbine (CCGT) Project in Malaysia, which the company describes as a 500 MW project. It is the Chinese manufacturer’s first overseas order for heavy-duty gas turbines, the large industrial machines used in utility-scale power plants.

The company will deliver the plant on an EPC (engineering, procurement and construction) turnkey basis and provide a 25-year long-term service agreement covering all major equipment. The customer is identified only as a Malaysian energy developer, and no contract value was given.

Executive Summary

The deal is broader than a turbine sale. Shanghai Electric says it will build the whole gas-fired plant and manufacture every core component itself: the gas turbines, the steam turbines, the generators, the heat recovery steam generators (boilers that capture hot turbine exhaust to make steam) and the air-cooled systems. It will also be the sole maintenance and service provider for 25 years, a bundle the company says puts it on par with the established leaders in heavy-duty gas turbines.

The timing matters. Demand for gas-fired generation has surged, driven in part by electricity-hungry AI data centers, and the dominant turbine makers, GE Vernova, Siemens Energy and Mitsubishi Heavy Industries, are working through backlogs that push new deliveries years out. Shanghai Electric says it can deliver new units as early as 2028 and that developers in Indonesia, Thailand, the Philippines and Vietnam have expressed strong interest. If that interest turns into orders, Chinese manufacturers could become a real alternative in a market with few suppliers.

For now this is one contract with an unnamed customer and undisclosed terms. It is a meaningful first step abroad, not yet proof of international competitiveness at scale.

A Seller’s Market Opens a Door

Heavy-duty gas turbines are among the hardest machines in the energy industry to make. They run at extreme temperatures, need advanced materials and cooling designs, and have to operate reliably for decades. Only a handful of companies build them at utility scale, which gives buyers little leverage when demand rises. Demand has risen sharply: utilities are replacing coal, balancing intermittent renewables and, increasingly, supplying power to large data center campuses. The incumbents have responded with fuller order books and longer waits for new units.

That is the opening Shanghai Electric is aiming at. Its claim that new units could ship as early as 2028 is its most commercially pointed statement, because developers who cannot secure turbines cannot build plants. For a buyer facing a multi-year wait, an earlier delivery slot can outweigh a supplier’s shorter international track record. The release does not say, however, how many 2028 slots exist or whether the Malaysian project will use one of them.

The likely early winners are developers in markets where cost and schedule matter most and where Chinese engineering and financing are already familiar. The established manufacturers are unlikely to feel much effect in the near term; one contract does not change a global order book. The bigger question is whether a credible alternative supplier eventually eases pricing power in a market that has run tight.

The Turnkey Bet: Building It and Keeping It Running

A combined cycle plant burns natural gas in a gas turbine, then uses the turbine’s hot exhaust to raise steam for a second turbine, getting more electricity from the same fuel. Shanghai Electric’s decision to make all the core parts in-house and wrap them in an EPC contract means the customer deals with a single counterparty for design, equipment, construction and integration. That simplifies coordination and puts responsibility for performance in one place.

The 25-year service agreement may be the most important piece economically. Across the industry, long-term service contracts covering inspections, replacement parts and overhauls are a large and steady source of revenue for turbine makers over a plant’s life, often more durable than the original equipment sale. Securing one on its first overseas heavy-duty project gives Shanghai Electric a recurring revenue stream and, just as valuable, a site outside China where its equipment will build an operating record.

For the customer, the trade-off cuts both ways. Single-source responsibility is simpler, but it concentrates risk: if the equipment underperforms or parts supply is disrupted, there is no second vendor to turn to for major components during the service term. The strength of that arrangement will depend on performance guarantees and penalty clauses, which have not been disclosed.

What the Track Record Does and Does Not Show

Shanghai Electric cites 103 heavy-duty units delivered, more than 21,000 MW of installed capacity from commissioned projects, and more than 1.3 million operating hours on units under its long-term service programs. For scale, a single turbine running around the clock accumulates about 8,760 hours a year, so 1.3 million hours is a substantial fleet history. Its current lineup has two principal models, rated at 300 MW and 78 MW.

Because this is the company’s first overseas heavy-duty order, that record appears to have been built mainly in its home market. Domestic experience is real engineering evidence, but international buyers and lenders typically also look at availability rates, efficiency, emissions performance and how well a supplier supports equipment far from its home base. The release gives no figures on any of those, so the claim of parity with global leaders is the company’s own assessment for now.

Southeast Asia as the Proving Ground

Southeast Asia is a logical first market. Economies across the region are growing, electricity demand is rising, and several countries are adding gas-fired capacity as they move away from coal. Malaysia has also become a major destination for data center investment, adding to pressure on its power system, although nothing in the announcement ties the Samalaju plant to data center load.

Shanghai Electric’s statement that developers in Indonesia, Thailand, the Philippines and Vietnam have shown strong interest should be read carefully: expressions of interest are not orders. Still, it points to a sales strategy of winning a reference project nearby and using it to win the next one. How smoothly Samalaju Unit 3 is built and runs will likely do more for that pipeline than any announcement.

Background

Shanghai Electric is a Chinese industrial group listed in Hong Kong (02727) and Shanghai (601727) that makes power generation equipment, including steam turbines, generators and gas turbines. Its heavy-duty gas turbine business has built a fleet of more than 100 units, mainly in its home market, and the Samalaju contract is its first heavy-duty gas turbine order outside China.

The heavy-duty gas turbine market has long been dominated by GE Vernova, Siemens Energy and Mitsubishi Heavy Industries, whose order books have lengthened as demand for gas-fired generation has grown. Samalaju is an industrial area in the Malaysian state of Sarawak on the island of Borneo, where electricity demand from industry has driven power development.

Sources

Source: Shanghai Electric Secures First Overseas Heavy-Duty Gas Turbine Order for 500 MW Malaysian Project, Shanghai Electric’s announcement of its contract for Unit 3 of the Sarawak Samalaju combined cycle gas turbine project in Malaysia.